Camaro Hood Latch #12

1
Click to enlarge
Being that we extended the hood and overall length of front end we need to fabricate a hood latch. As seen Sam is using 3/16th wire to form the outer perimeter.

2
Click to enlarge
Using chip board so he can cut out metal to smooth it.

3
Click to enlarge
Laid out on some 18 gauge

4
Click to enlarge
Metal is ready on one side.

5
Click to enlarge
Welded up and ground

6
Click to enlarge
Unique easy on the finger ground.

7
Click to enlarge
Up in place works great.