57 Chevy - Frame Clip

One of the upgrades we installed was an Art Morrison frame clip with rack and pinion, including stainless control arms and big disc brakes.

Stainless control arms "Nice" !.

After preliminary installation all the measurements are checked at the suspension points.

Every thing is mounted and squared up, time to weld it in.

The full engine cradle was modified to make in to an engine mount only.

We will graft it to the frame.

New mounts hold the 350 fuelie in place.

9 inch Ford Rear end with 355 gears.

Routing A/C lines and hoses, condensor etc.